70V 5A Charging 10A Discharging Battery Pack Aging Machine
Main functions:
For the charging and discharge of the battery pack, with the
function of constant current and constant
pressure, through the battery charging and discharge cycle, you can
detect whether the battery charging
protection and discharge protection are normal
Testing items include: battery charging protection voltage, discharging protection
voltage, capacity, etc.
Product characteristics:
♦ With PC software, USB hub, and router
♦ The 32-bit ARM chip selected for aging system has high reaction
speed block and high measuring
voltage and current accuracy
♦ Pass the data via the PS232 or via the network
♦ The voltage can be set at an upper limit of 5-70V, charging
current 0-5A, discharge current 0-10A
♦ The computer is not configured locally, so the customer needs to
buy it itself
♦ With constant current and constant pressure charging function
♦ The equipment has a constant current discharge function
♦ Fully meet the requirements of the battery pack charge and
discharge outlets and charge and
discharge outlets
♦ Colleagues can be aging the positive plate charging protection
negative plate discharge protection
♦ By charging and discharge cycle of the battery, you can detect
whether the charging protection
and discharge protection of the battery are normal
♦ Charge and discharge cycle on the battery and record the charging
capacity and discharge capacity
♦ The equipment has anticonnection protection function
♦ The equipment has the protection of voltage upper and lower limit
setting
♦ The equipment has a safe discharge current protection function
♦ PC computers can be connected through the serial port to reduce
the complexity of instrument use
♦ Network connection mode can be adopted, and the PC computer
terminal can control within 254
instruments by only providing one network port
♦ The software system adopts a classic and mature C/S mode
♦ There are two ways: serial port and network
♦ The serial port can realize the accurate communication of several
instruments for short distances
♦ The network can achieve long-distance multiple instrument
preparation communication
♦ Based on the Windows operation interface, the MYSQ database is
used to store the test data
♦ The equipment can view the charge and discharge aging curve, and
colleagues can export the curve diagram
♦ In network mode, automatic online, no manual online is required
♦ The tested data provides the measurement data check function
♦ The instrument number is displayed through the LED lamp, and the
corresponding instrument number
location can be checked at any time
♦ The instrument provides P + and P-interfaces, and CH + and CH-,
can test special finished batteries
♦ The battery is mainly in the test range, you can charge and
discharge the battery
| Input Power | AC 380V ±10% 4.2kw 60/ 50Hz |
| Voltage | Measuring range | 0~70V |
| Precision | ±(0.2% of reading + 0.2% of range) |
| Electric Current | Charging range | 0~5000mA |
| Charging accuracy | ±(0.2% of reading + 0.2% of range) |
| Discharge range | 0~10000mA |
| Precision | ±(0.2% of reading + 0.2% of range) |
| Charging | Constant voltage cut-off current | (minimum)10mA |
| Capacity | Precision | ±1‰ |
| Power | Discharge power | ≤800W |
| Time | Inspection time | <2S(Receive real-time & LT; 2s) |
| Timing range | 0 ~ 999 hours / Step |
| Data recording interval | ≥5S |
| Median version | 1.1 series |
| Charging | Charging mode | Constant current and constant voltage charging |
| Cut-off condition | Voltage, current, relative time, overcharge protection |
| Discharge | Discharge mode | Constant current discharge |
| Cut-off condition | Voltage, relative time, over-discharge protection |
| Circulates | Cyclic range | 1~999 |
| Single cycle number of steps | 100 |
| Voltage and current detection sampling | Four wire connection |
| Noise | <50dB |
| Database | Using My SQL database to manage test data |
| Communication Mode of upper computer | Based on TCP / IP Protocol, serial port |
| Data output mode | EXCEL,TXT,Chart |
| Communication interface | Mesh opening |
| Number of channels per cabinet | 12 |
| Case size | W*D*H:450MM*300MM*170MM |
| Cabinet size | W*D*H:900MM*600MM*1900MM |
FAQ
A: How long is the guarantee period of the machine?
B: Our machines are guaranteed for two years, during which the company
will repair them free of charge if
there is any problem.
A: Do you support after sales service?
B: Yes, after purchase we will have professionals to install and
train, and the warranty is two years. Exported to
Europe and the United States, Southeast Asian countries, there is a
site in India
A: What scope does the product apply to?
B: Company 12 years committed to column Battery Pack Automation
Production Equipment, and column Battery
Pack Automation Production Line. Products are mainly used in
digital batteries, energy storage batteries, tool
batteries, power batteries, automotive batteries, etc.
